LPG Space Heater
- Home
- Products
- LPG Space Heater
Salient Features
- Economical in comparison with conventional brooding systems
- Electronic based auto function system, which increase reliability of daily operation
- A 3mtr. Long temperature sensor with SS wire braided to protect it from cuts & breaks
- Digital temp. controller provided for easy view
- An average person/labour can understand & operate it easily
- Precision engineered by the experts
- No insulation required to cool the heater body, it designed as automatic keep itself cool while heater is running so it can put on litter/floor
- All time uniform temperature @ any corner of the brooding shed (as per dimension recommended)
- Easy maintenance by modular construction
- One year warranty from the date of purchase
- eater Can be hanged, provision given on heater
- Provision given for hot air diversion by flare duct
- Spare easily available on order since made by "ZENCO INDUSTRIES"
- Unit can be run on the "INVERTER" or "GENERATOR"in absence of power (optional)

Safety Features
- Heater will be functioning automatically depending on the room temperature
- Carbon monoxide will not produce in this unit because of blue flame i.e. 99% gas burning
- Protection provided against FLAME, BLOWER, MOTOR & TEMP. SENSOR failure
- Hooter will blow when LPG exhaust in cylinder
- Heater will hold & stop the gas & electricity incase of any failure in system
- Temperature can be viewed on panel board & adjust easily to increase or decrease the required room temperature
- Rodent proof body design which prevent to enter rodent inside chamber
- Easy replacement of auto-control box incase of any malfunction
Technical Specification
Gas Consumption – Min. Grams/Hr.
Max.4.8 Kgs./Hr.
Operating Gas Pressure – 0.7-1.4 Kg./Sq.Cm.
(10-30 Lbs./Sq.Inch)
Calorific Value – Min. Kcal./Hr.
Max. 56832 KCal./Hr
Brooding Capacity – 15000 day old chicks @ 28-30 C
Brooding Area Coverage – 33000 CFT. (140′ L x 30′ W x 8′ H)
Weight – 50 Kgs
Dimension – 630 L x 490 W x 760 H (mm)
25 L x 19 W x 30 H (inch)
Body- Rustproof GP Shee
Electric Motor – 1⁄2 Hp, 1-Phase, 1440rpm, 1.7amp.
Fuel -LP Gas
Temperature Range – 0 to 100 & 2 (both settable)
AC Supply – 220V, Single Phase, 4 Amps
Temp. At outlet – 140 C (at outlet)
Temp. Sensor Type – PT-100
Ventilation (Air required) – 1000 CFM or 1700 m/Hr